Zhongxin supplies international packaging groups and serves end-use applications for leading foodservice, retail, and supermarket brands.
Molded fiber tableware is specified in a language borrowed from flat paper, and that is where most sourcing mistakes begin. This page explains which numbers on a bagasse or molded fiber spec sheet actually govern fit, strength and landed cost — grams per piece, projected dimensions, cavity count, colour and barrier codes — how to convert them into something comparable between suppliers, and which fields must be in your RFQ before a quotation is usable.

Last updated: October 2026. Every product figure quoted below is taken from the published specification blocks on our own food packaging product pages. Derived values are arithmetic performed on those published numbers and are labelled as such. Nothing here is legal or standards advice; test methods and certificate scopes should be confirmed against the current standard and the scheme’s public listing before they enter a specification.
For bagasse and molded fiber foodservice items, the decision-relevant specification fields are grams per piece, the dimensional set (opening size, base size and height, with lid-governing height identified), cavity count on the tool being quoted, the colour/fibre variant, and the barrier or grease-resistant system with its test report. GSM (g/m²) is the odd one out: it is a flat-sheet measurement defined for paper and board, and a molded fiber article is not a flat sheet — it is a three-dimensional shape formed from a charge weight. GSM is still worth requesting when you are comparing liners, lids or printed sleeves, but it should never be the primary basis for comparing two different article shapes.
| Field | What it records | What it decides commercially | Common trap |
|---|---|---|---|
| Weight per piece (g) | Mass of one finished, dried article | Perceived quality and rigidity, material cost per piece, net carton weight and freight | Treated as a proxy for strength without stating which wall or rim carries the mass |
| GSM / grammage | Mass per unit area of a flat sheet, measured under a conditioned standard | Comparable only between articles of the same shape and depth, or for flat goods such as lids and liners | Applied to cups, deep trays and clamshells, where wall area makes the figure meaningless across shapes |
| Size (mm) | Published external dimensions, usually length × width × height or Ø diameter × height | Portion fit, oven and microwave clearance, tray-rack compatibility, lid matching, pack height | Ambiguous height when an item publishes two heights (open and closed); lid fit then depends on an unstated assumption |
| Capacity (ml / oz) | Nominal fill volume | Menu and portion specification | Nominal capacity quoted to the brim while the practical fill line is 10–15% lower |
| Packing (pcs) | Inner-bag count × bags per carton | Warehouse picking, sleeve merchandising, opening quantity for stores | Read as a single number without deriving total pieces per carton |
| Carton size (cm) | Outer carton dimensions | Cubic metres per shipment, palletisation, container load and landed cost per piece | Carton published but no pieces per carton or CBM per carton, so freight cannot be checked |
| Raw material | Fibre stream, e.g. sugarcane bagasse pulp or molded fiber | Claim support, certificate scope, colour range | Written as “eco” or “biodegradable” instead of a material name |
| Cavity count | Articles produced per mold set, per cycle | Output ceiling, tooling cost split per piece, realistic lead time | Never quoted, so a high-volume order is priced against a tool the supplier does not own |
| Colour / fibre variant | Natural, bleached, bamboo, kraft or custom print | Brand appearance and, importantly, certificate scope | Treated as cosmetic when barrier and compostability certificates are issued per formula × colour × category |
| Barrier / grease-resistant system | The functional treatment family, referenced by a tested result | Hot, oily and fatty food performance; PFAS status | Specified by a formula or supplier code name instead of a report naming the item, method and detection limit |
| Lid material and mating code | Which lid fits which base, and what the lid is made of | Leak behaviour, microwave policy, single-material compostability claim | Lid and base ordered as separate items with no stated mating pair |
Grammage has a precise meaning in the paper industry. ISO 536, Paper and board — Determination of grammage, defines it as mass per unit area of a flat sample conditioned to a standard moisture content, and TAPPI’s parallel method, T 410, Grammage of paper and paperboard (weight per unit area), is built on the same flat-sample logic. Both assume you can cut a square metre of the material and weigh it.
Molded fiber does not work that way. A wet charge of fibre is vacuum-formed over a shaped tool, then dried and often hot-pressed. What you control and what you pay for is the charge weight per article — the grams per piece — and the shape distributes those grams across a base, a sidewall, a rim and any flange. Two articles can carry the same grams per piece and perform completely differently if one is a shallow plate and the other a deep bowl, because the bowl puts more of its mass into vertical wall, which is where bending stiffness comes from.
Practical consequences for a buyer:
A useful middle ground is a footprint-equivalent mass: divide the published weight per piece by the article’s projected opening area. It is not ISO 536 grammage and must not be presented as such — it is a normalisation that lets you see how much fibre sits per square centimetre of eating or holding surface. Below, all weights, dimensions and packing figures are the published values from our product pages; the derived columns are our own arithmetic on those figures.
| Item | Published size (mm) | Published weight (g/pc) | Published packing (pcs) | Pieces / carton (derived) | Published carton (cm) | Carton volume, m³ (derived) | Net weight / carton, kg (derived) |
|---|---|---|---|---|---|---|---|
| 9″ plate | Ø225 × 19.6 | 15 | 125 × 4 | 500 | 32 × 23.5 × 46 | 0.0346 | 7.5 |
| 12 oz bowl | Ø160 × 37 | 10 | 125 × 8 | 1,000 | 47 × 33 × 33 | 0.0512 | 10.0 |
| 16 oz bowl | Ø175 × 37 | 15 | 125 × 8 | 1,000 | 54 × 37 × 36.5 | 0.0729 | 15.0 |
| 12 oz cup | Ø90 × 112 | 12.5 | 50 × 25 | 1,250 | 47 × 39 × 47 | 0.0862 | 15.6 |
| 6″ burger box | 152 × 152 × 44/75 | 21 | 125 × 4 | 500 | 48 × 32 × 31.5 | 0.0484 | 10.5 |
| 450 ml rectangular box | 180 × 125 × 39 | 15 | 125 × 4 | 500 | 51 × 37.5 × 27 | 0.0516 | 7.5 |
| DBH750 — 750 ml box | 180 × 125 × 64 | 18 | 125 × 4 | 500 | 55 × 37.5 × 27 | 0.0557 | 9.0 |
| DBH1000 — 1000 ml box | 180 × 125 × 75 | 20 | 125 × 4 | 500 | 59 × 37.5 × 27 | 0.0597 | 10.0 |
| 1000 ml 2-compartment box | 230 × 135 × 65 | 24 | 125 × 4 | 500 | 42.5 × 28.5 × 47 | 0.0569 | 12.0 |
| 5-compartment lunch tray | 281 × 221 × 45 | 46 | 50 × 6 | 300 | 40 × 29 × 45 | 0.0522 | 13.8 |
The derived columns are where specification errors normally surface. A buyer who reads “125 × 8” as 125 pieces per carton instead of 1,000 will under-forecast a shipment by a factor of eight; a buyer who has pieces per carton but no carton dimensions cannot check freight at all. Ask for both, in writing, on the same line of the quotation.
Dividing published weight by projected opening area gives an indicative fibre load per unit of usable surface. These figures are author-computed normalisations, not factory sheet grammage and not ISO 536 results:
| Item | Projected opening area (cm²) | Published weight (g/pc) | Footprint-equivalent (g/m²) | How to read it |
|---|---|---|---|---|
| 9″ plate | 397.6 | 15 | ≈ 377 | A shallow article spreads its mass over a large surface, so the lowest figure here belongs to the item with the least wall to support |
| 12 oz bowl | 201.1 | 10 | ≈ 497 | 37 mm deep: moderate wall contribution |
| 16 oz bowl | 240.5 | 15 | ≈ 624 | Same 37 mm depth, wider opening and a heavier article — the added mass is not only area |
| DBH750 750 ml box | 225.0 | 18 | ≈ 800 | 64 mm deep walls carry a large share of the 18 g |
| 5-compartment lunch tray | 621.0 | 46 | ≈ 741 | Large footprint, but internal dividers add mass that the footprint does not reflect |
| 12 oz cup | 63.6 | 12.5 | ≈ 1,965 | The method breaks here. A 112 mm-tall tapered wall is most of the article’s surface, so a small opening inflates the ratio enormously |
The cup row is the whole argument in one line: footprint-equivalent mass is a within-shape comparison tool, not a cross-shape one. Used properly it answers “is this 16 oz bowl heavier per unit of surface than the 12 oz bowl?” — yes, on these published figures — and it should never be used to argue that a cup is “twice the material” of a bowl.
Three of our published rectangular boxes share an identical 180 × 125 mm footprint and differ only in height. That makes them a clean demonstration of which numbers move when you change one dimension:
Height drives three separate line items at once: fibre per piece, carton length, and therefore shipping volume efficiency. Going from the 450 ml to the 1000 ml article adds 33% to the weight per piece and removes about 14% of the pieces you can ship per cubic metre. A buyer who specifies only “750 ml rectangular box with lid” leaves out all three of those decisions, which is why the same nominal capacity produces widely different landed costs between suppliers. Our guide to carton packing, case quantity and shipping efficiency covers the freight side of this arithmetic in more detail.
Dimensional numbers also need a tolerance policy, because molded fiber moves with moisture and press temperature. How to state accepted deviation, and how to check lid fit against a published dimension set, is covered in bagasse container dimensional tolerances.
Cavity count is the number of finished articles one tool set produces per cycle. It is the main determinant of how much volume a supplier can actually deliver against your date, and it explains most of the price gap between two quotations that describe the same item:
We do not publish cavity counts on product pages, so treat this as a question to ask on the specific item you are quoting, alongside MOQ, mold cost, sample lead time and production timeline. Cavity depth also interacts with the forming route — dry press and wet press behave differently on deep-cavity articles, and published density and mold-cost ranges for both routes are set out in the OEM / ODM partner process guide. For a genuinely new shape, the tool decision is made during development rather than at order placement — see OEM bagasse packaging development from product drawing to mass production.
Catalogue colours for bagasse tableware generally run natural (unbleached tan), bleached white, bamboo and kraft, with custom print available on most items — our product pages list “Custom logo or color print available” as a standard option. Buyers usually treat colour as branding. It is also a compliance and certificate variable:
Grease and liquid resistance in molded fiber comes from either the fibre package itself or a functional treatment. Suppliers refer to these treatments by internal codes, formula names or supplier shorthand, and buyers often copy that code into a specification. That is a mistake in two directions: the code is meaningless to your other suppliers and to your auditors, and it may change without the performance changing.
What should be specified instead:
Ask suppliers to translate their code into these four statements. A supplier who can only give you the code, and not the report behind it, has not given you a specification.
Lids are where a specification can quietly undermine both a claim and an operation. A bagasse base with a PET or PP lid is two materials with two end-of-life paths, and a growing number of buyers now specify pulp lids or no lid for exactly that reason — the request arrives in RFQs as a material instruction plus a compliance question, not as a preference.
Three things to lock into the spec:
| Field to state | Why it must be in the RFQ |
|---|---|
| Item type, target capacity and the practical fill line you need | Prevents brim-full volumes being quoted against your portion |
| Opening and base dimensions, and the height that governs lid fit | Removes the two-height ambiguity that breaks rack and oven clearance |
| Accepted dimensional tolerance and how it will be measured on arrival | Turns “consistent” into an inspection you can actually run |
| Weight per piece, with the floor you will not accept | Anchors material cost, rigidity and net carton weight to one auditable number |
| Colour / fibre variant and whether it must match a golden sample range | Colour is a certificate-scope and batch-consistency variable, not decoration |
| Barrier requirement described by the worst food in your range | Makes three suppliers’ offers comparable without exposing anyone’s formula |
| PFAS status as a total-fluorine report with method and detection limit | A declaration without a detection limit is not a result |
| Food-contact documents required for the destination market | Determines which lab, which method and which turnaround the order carries |
| Compostability scheme, category and product listing to be matched | Certificate scope is per site, formula, colour and category — listings must match your SKU |
| Lid item code and the confirmed mating pair, or “no lid” | Single-material claims and leak performance both depend on it |
| Cavity count of the tool being quoted, and daily output on that tool | Decides whether the promised lead time is physically available |
| Inner-bag count, bags per carton, pieces per carton, carton cm, CBM per carton, net and gross weight per carton | Freight is the largest cost block after the unit price; every one of these fields belongs on the same line |
| Pallet pattern and container loading expectation | Carton CBM alone does not survive a palletising decision made by someone else |
| Sample scope: which items, which cavities, which colour | Samples that do not come from the quoted tool tell you little |
| Named defects you will reject on arrival | Warping, burrs, pinholes and uneven walls each have a cause; see the defect guide below |
Cost context belongs beside this block rather than inside it. What actually determines cost per piece is explained in the bagasse tableware wholesale price guide, and carton strength against real stacking loads in how to verify carton strength and container loading. When a specification is agreed but production drifts, the failure modes are catalogued in molded fiber food packaging defects: warping, burrs, pinholes and uneven walls.
Specify grams per piece for the article, and reserve GSM for genuinely flat components such as lids, liners and printed sleeves. Grammage is defined for a flat sheet conditioned to standard moisture, which a formed three-dimensional article is not. If a supplier offers GSM for a cup or a deep tray, ask which area the figure was divided by — in most cases it is an arithmetic convention rather than a measured grammage. Weight per piece is also the number that ties directly to carton net weight, so it is the one you can audit against a freight invoice.
Compare within a shape family using three numbers side by side: grams per piece, opening diameter, and height. Then compute an indicative fibre load per unit of usable surface by dividing weight by projected opening area. That normalisation exposes a light article dressed up as a “heavy duty” one. Do not extend the same comparison across shapes — a 12 oz cup has a tall tapered wall and its area-to-weight ratio is not comparable to a plate, and forcing the comparison is exactly how GSM arguments go wrong in molded fiber sourcing.
Because colour is not a cosmetic layer in molded fiber — it usually reflects a different pulp treatment path, and it can also change which certificate scope the article sits under. Compostability and food-contact certificates for these products are commonly issued per manufacturing site, barrier formula, colour and product category, so a white variant of a certified natural item may need its own scope confirmation. Ask for the certification listing that names the colour you are ordering, not a generic certificate PDF for the shape.
Cavity count is how many articles one mold set forms per production cycle. It sets the supplier’s real output ceiling for your item, it drives how tooling cost is amortised across your order volume, and it determines whether a promised lead time is physically possible. Ask how many cavities the quoted tool has, how many pieces per day that tool produces, and whether your order runs on an existing production tool or a trial tool. Also sample per cavity during incoming inspection, because wall thickness and trim can vary between cavities on the same tool.
No — specify the tested performance, not the internal code. A formula name or supplier shorthand is meaningless to your other bidders, to your auditor and to anyone who later reformulates under the same label. Instead state the worst food in your range (hottest, oiliest, wettest), require a test report whose sample identification matches the article code you are buying with the method and detection limit printed, require a total-fluorine result if PFAS-free is a claim you will repeat, and confirm the treatment does not move the article outside the certificate scope you rely on.
Six, all on the same line: inner-bag count, bags per carton, total pieces per carton, carton dimensions, cubic metres per carton, and net plus gross weight per carton. Derived from published figures, a 125 × 4 packing on a 55 × 37.5 × 27 cm carton is 500 pieces in 0.0557 m³ and 9 kg net at 18 g per piece — while 125 × 8 is 1,000 pieces. Without all six fields, two quotations that look identical in unit price can differ materially on landed cost, especially since cartons of different shapes stack differently on a pallet.
That depends on your leak performance, heating method and end-of-life claim rather than on preference. A pulp lid keeps the article single-material, which supports a cleaner compostability story and avoids buying a separate plastic stream, but it changes fit tolerance, steam behaviour and often the venting design. A PET or PP lid generally gives tighter visual closure and more predictable retention. Specify the base and lid as a named mating pair with the codes printed on the quotation, and state whether the item will be heated, since that decides the vent and material requirements.
Only if they come from the tool that will run your order. Request samples of the exact item code, colour and barrier variant you are quoting, and check them against the written spec: measured dimensions with a caliper, weighed pieces on a scale accurate to 0.1 g, lid retention on a stacked column, and carton packing confirmed by counting a full carton rather than trusting the printed pattern. Our product pages publish free samples with postage at the buyer’s own expense, and MOQ for items such as DBH750 and DBH1000 is listed on those pages from 100,000 pieces.
Treat it as a catalogue, not a specification. Send the RFQ block above and require a returned, completed version. A sheet that omits weight per piece, carton dimensions and packing, tolerance, lid code, cavity count and test references cannot be compared against a second supplier, and it will not survive an internal audit if you resell into foodservice programs or chains that ask for the same fields.
If you already have a supplier spec sheet, send it to us with your destination market and the worst food in your range, and we will return it as a completed specification block — grams per piece, dimensions with the lid-governing height identified, packing with pieces per carton and CBM per carton, colour and certificate scope, barrier requirement stated as a test result, and the lid mating pair. For items in our current range we can arrange samples under the terms published on each product page. Start at our contact page, or browse bagasse tableware, molded fiber packaging and our OEM / ODM programme. Certificate documentation is listed on the honor and certificate page.