Zhongxin supplies international packaging groups and serves end-use applications for leading foodservice, retail, and supermarket brands.
California runs a second, separate rule for bagasse tableware that most supplier marketing never mentions: SB 1335 bars state-facility food service operations from dispensing prepared food in any item that is not on CalRecycle’s List of Approved Food Service Packaging. This guide sets out which facilities are covered, which item categories are covered, what the compostable and public-health criteria actually require, and exactly what a distributor bidding a California contract should make a manufacturer put in writing.

Under SB 1335 the question is not whether fiber composts; it is whether this item, under this name, appears on CalRecycle’s List.
Three tests run in order, and a bagasse item has to pass all three.
First, is the buyer a covered “food service facility”? Second, is the item a covered category of “food service packaging”? Third, does that item appear on the List of Approved Food Service Packaging, and if it does not, is it one of the narrow exclusions or is there inventory or contract relief?
The trap for importers and distributors is that the third test is item-level and list-based, not certificate-based. A BPI certificate, an ASTM D6400 report, a OK compost badge or a supplier’s “PFAS-free” letter none of them place an item on the List. Only CalRecycle’s List does, and CalRecycle itself re-evaluates what is on it at least once every five years and removes items. A buyer who treated a certificate as the ticket has, in practice, been buying an item that cannot lawfully be dispensed at a covered facility.
For a manufacturer the opportunity is equally concrete: the compostable route the regulations recognise is a materials route, and molded fiber derived from sugarcane bagasse with no plastic is already a named material type on CalRecycle’s materials list. That is a real advantage for uncoated fiber, and a real problem for anything carrying a plastic coating or a fluorinated oil barrier.
The statute defines a “food service facility” as an operation or business that is located in a state-owned facility, operating on or acting as a concessionaire on state property, or under contract to provide food service to a state agency, and that stores, prepares, packages, serves, vends or otherwise provides prepared food. CalRecycle’s own guidance adds the practical detail: cafeterias, restaurants, catering companies, shops, markets, delis, Department of Corrections and Rehabilitation commissaries, University of California and California State University food courts and dormitories, fairs, expositions and legislative offices.
That definition matters commercially because it tells a distributor which line items in a bid are actually exposed. “Prepared food” is defined as a food or beverage prepared for consumption on or off the premises using any cooking or food preparation technique, and it excludes prepackaged, sealed food mass-produced by a third party off the premises.
| Buyer type | Covered as a food service facility? | What to confirm before quoting |
|---|---|---|
| Cafeteria inside a state agency building | Yes | Whether the contract is direct or via a caterer, and who specifies packaging |
| Concessionaire on state property, such as a food vendor at a state park or beach | Yes | Which concession agreement governs and whether packaging is in scope of that agreement |
| Caterer under contract to provide food service to a state agency | Yes | Whether the caterer buys packaging itself or the agency supplies it |
| University of California or California State University food court or dormitory dining | Yes | Campus buying channel and the item list the dining services team works from |
| Operation at a fair, exposition or state facility event | Yes | Event-by-event specification, which changes year to year |
| Business lunch caterer serving a private office in a leased floor of a state building | Depends on the operation’s location and contract | Get the site and contract facts in writing; CalRecycle advises anyone unsure of the definition to take legal advice |
| Ordinary restaurant, grocery deli or coffee chain with no state site, concession or agency contract | Not covered by this program | Other California rules still apply, including compostable labeling and PFAS rules |
| Reseller buying for general foodservice distribution | Not covered as a facility | Ask what share of the range must carry a List entry for the end customers who are covered |
Covered “food service packaging” means a product used for serving or transporting prepared, ready-to-consume food or beverages, and the statute names the categories: plates, cups, bowls, trays, and hinged or lidded containers. CalRecycle’s program page lists bowls, cups, plates, containers and trays as the products that must be approved.
Every one of those categories is a core part of a molded fiber range, which is why a bagasse manufacturer cannot treat SB 1335 as a niche rule. The exclusions are narrower than suppliers often assume, and they are drawn around single-use disposable items, unprepared food, beverage containers and reusable hard goods.
| Category in the statute | Published Zhongxin format | Published specification | SB 1335 position |
|---|---|---|---|
| Hinged or lidded containers | PCT096 9 inch by 6 inch clamshell | 230 x 158 x 46/80 mm, 30 g per piece, 125 x 2 pieces per carton, 47 x 32 x 24 cm carton | Covered; needs a List entry by item name |
| Hinged or lidded containers | PCT091 9 inch clamshell | 235 x 230 x 50/80 mm, 42 g per piece, 100 pieces per bag, 2 bags per carton, 200 pieces per carton | Covered; needs a List entry by item name |
| Bowls | PB24 24 oz round bowl | 204.4 mm diameter x 41.8 mm, 21 g per piece, 125 x 4 pieces per carton | Covered; specify the lid separately |
| Cups | CP012 12 oz cup | 90 mm diameter x 112 mm, 12.5 g per piece | Covered as the cup; a cup lid is separately excluded |
| Trays | Five-compartment tray | 317 x 216 x 24 mm, 30 g per piece, 125 x 4 pieces per carton | Covered; common in contract and correctional dining |
| Trays | TR104 fiber tray | 260 x 115 x 30 mm, 18 g per piece, 125 x 4 pieces per carton | Covered |
| Not a covered item | Cup lids, straws, utensils, plastic bags | Lid and cutlery codes published separately | Expressly excluded from the definition |
| Not a covered item | Ceramic, porcelain, glass or nonfoil metal ware the facility washes and reuses | Not applicable | Expressly excluded |
| Conditional exclusion | Items used at a health facility, residential care facility for the elderly or community care facility | Not applicable | Excluded where a medical professional recommends or prescribes them, or the facility determines them reasonably necessary to assist residents with serving and consuming food, or to protect health or safety, and the facility determines the products or their functional equivalents are not on the List |
Two notes on that table. First, the item names matter more than the dimensions: the List is searched and recorded by item, so a private-label rename, a new cavity count or a new colour is a different question, not a paperwork detail. Second, the health-facility exclusion is doing real work in the 2026 market. If you are supplying a state hospital or a residential care facility for the elderly, the exclusion can apply, but the statute conditions it on a facility determination that the product or its functional equivalent is not on the List. That is a documented judgement by the facility, not a blanket dispensation, so it should never be the only reason a range is unlisted.
CalRecycle maintains the List of Approved Food Service Packaging under Public Resources Code section 42370.3, and a food service facility may not dispense prepared food using food service packaging unless the type of packaging is on that list once the list has been published. The list is published on CalRecycle’s website and mirrored by the Department of General Services, which is also required to publish the statutory duties on food service facilities in the State Contracting Manual.
The practical sequence for a buyer is therefore: search the List for the item as the manufacturer or distributor names it; confirm the item name matches the invoice and packing list; then match the material and coating declaration to what the List entry says. A manufacturer that cannot give you the exact item name under which it is listed has, at best, given you a certificate and at worst a compliance gap.
| Document or fact | What it proves | What it does not prove |
|---|---|---|
| Item appears on the List of Approved Food Service Packaging | The item may be used by a covered facility, subject to the exclusions and inventory relief | Nothing about another size, colour, cavity count or private-label name |
| BPI or equivalent compostability certificate | The product meets a recognized compostability standard at certificate scope | It does not place the item on the List |
| ASTM D6400 or D6868 test report | Biodegradation and lab performance under that standard | California’s criteria also look at real collection and processing, not lab results alone |
| Total fluorine test result | Whether the item is inside the 100 ppm total fluorine ceiling the criteria use as a PFAS proxy | It does not cover the regulated-metals ceiling or the Prop 65 disclosure duty |
| Supplier letter stating “compostable” or “eco-friendly” | A commercial statement | Nothing legal; CalRecycle’s own list and the regulation are the reference |
| Invoice naming the listed item | Helps the facility answer a CalRecycle records request | It does not survive an item removal unless inventory relief applies |
Under Public Resources Code section 42370.2(e), the director’s criteria for “compostable” ask whether the packaging will, in a safe and timely manner, break down into usable compost in a public or private aerobic compost facility designed for and capable of processing postconsumer food waste and food-soiled paper; whether food service packaging made from plastic is certified to the relevant ASTM standard; whether the item is regularly collected and accepted at compost facilities; and whether it is eligible to be labeled “compostable” under California’s uniform labeling standards.
CalRecycle’s published criteria are stricter than the laboratory standard in one respect buyers should know about: for a plastic food service packaging item, the compostable criteria require 90 percent biodegradation within 60 days, whereas ASTM D6400 and D6868 allow 90 percent within 180 days. CalRecycle explains the 60-day figure as matching typical processing timeframes at California composting facilities and the FTC Green Guides concept of a “safe and timely manner,” defined in 16 CFR Part 260 as roughly the same time as the materials it is composted with. A supplier quoting only the 180-day ASTM figure has answered a different question.
For fiber there is a more direct route. CalRecycle publishes a Food Service Packaging Materials List, issued in December 2021, recording material types already determined to meet the criteria. The compostable side of that list, under California Code of Regulations section 17989.5(a)(1)(A), includes uncoated paperboard, clay-coated paperboard, molded fiber derived from bamboo, and “Fiber – Sugarcane/Bagasse: Molded fiber derived from sugarcane bagasse; no plastic.”
The three words that decide a clamshell are “no plastic”. An uncoated bagasse item sits on a named material route. An item carrying a plastic dispersion coating, a PE lamination or a liner is a different animal, and the plastic-specific expectations, including the 60-day biodegradation figure, come back into play. That is why the specification sheet, not the marketing claim, is where the conversation belongs: our guide to reading molded fiber specification sheets covers the barrier codes that separate these constructions.
Compostability is not sufficient on its own. Items on the List must also meet the public health criteria in California Code of Regulations section 17989.2, and those criteria are where a molded fiber item with the wrong additive package fails.
| Criterion as published | Threshold | What to ask the manufacturer for | Why fiber items fail it |
|---|---|---|---|
| Intentionally added PFAS, measured as total fluorine | No more than 100 parts per million total fluorine | The test report for the exact item, base, formula and colour, with the method and detection limit stated | Some oil and grease barriers historically used fluorinated chemistry; the ceiling is a screening proxy, so a nearby result is not a pass |
| Regulated metals under the Toxics in Packaging Prevention Act | No combination of lead, mercury, cadmium and hexavalent chromium exceeding 100 ppm by weight | A reported sum, not four separate pass statements | Metals arrive through pigments, dyes, adhesives and stabilizers, including in printed or coloured goods |
| Proposition 65 disclosure | Manufacturers must disclose whether a product contains chemicals on the Proposition 65 list | A dated written disclosure per item, plus the reason if the answer is “none” | Recycled and virgin fiber inputs and process chemicals are both in scope of the question |
| Recyclable-criteria sizing rule, where an item is put forward as recyclable | At least two inches in at least two dimensions | Confirm the smallest formats in the range against the rule | Small tasting cups, mini trays and dip items can be below the recovery size at a materials recovery facility |
Note that the total fluorine ceiling is expressed as total fluorine rather than total organic fluorine, which changes how a lab result should be read and is worth checking against the wording on the report you receive. Our PFAS-free procurement checklist walks through the six documents to request and how to read each one.
Application runs through CalRecycle’s Sustainable Packaging Act Reporting System. A manufacturer creates a WebPass account, which is tied to an individual rather than an organization, builds a company profile, and submits a food service packaging application showing how each item meets the criteria in sections 17989.2 through 17989.5. Applications are accepted on an ongoing basis. CalRecycle checks completeness, notifies the applicant of any missing information or deficiencies within 30 days of submission, allows an additional 30 days to correct, then evaluates the application and adds approved items to the List.
Getting on is not the end of the obligation. The statute requires the department to evaluate the list no less than once every five years and allows removal or addition after evaluation. The removal process is documented: a preliminary determination, notice to the manufacturer with the reasons, at least 30 days for the manufacturer to submit comments and additional information, evaluation of those comments, and removal if the item no longer meets criteria. Items can also be removed for their potential to contribute to litter, public health or wildlife impacts.
This is where a 2026 buyer needs to be alert rather than merely compliant. CalRecycle completed its first re-evaluation of the List in October 2025, and in spring 2026 removed items that are no longer manufactured or no longer available in California. CalRecycle separately listed the manufacturers that notified it that select products were no longer made or no longer available in the state. A listed item that a supplier has stopped making is still on the List for a while, then is not.
| Event | What happens | Buyer action |
|---|---|---|
| Item added after evaluation | Item appears on the List under a specific name | Record the exact item name and match it to purchase documents |
| Item specification changes | New colour, cavity count, coating or base of production | Treat as a new qualification question; do not assume the old entry transfers |
| Preliminary removal determination | CalRecycle notifies the manufacturer of the reasons | Ask the supplier whether a determination has been received on any item you buy |
| Manufacturer comment window | At least 30 days to submit comments and information | Do not place a long lead-time order on an item in this window without a plan B |
| Re-evaluation cycle | Formal review at least once every five years | Re-verify the List before each contract renewal, not once at onboarding |
| Removal published | Item no longer on the List | Check inventory relief, which depends on when stock was possessed or the contract was signed |
Public Resources Code section 42370.4 prohibits a food service facility from dispensing prepared food in packaging that is not on the published list, then gives four forms of relief. A facility may still use packaging it possessed before the list was published; packaging it possessed before the list was updated to remove that type, provided the type was on the list when the facility took possession; and the same two tests where the inventory was acquired under a contract entered into before publication or before removal. Where a contract is entered into, renewed or updated after the list was published, the facility itself is responsible for ensuring the packaging is compliant.
Section 42370.5 is the part of SB 1335 that reaches directly into a supplier’s paperwork. On request, a food service facility must give CalRecycle reasonable and timely access to contracts, invoices and purchase orders between the facility and a food service packaging manufacturer or distributor that contain information showing whether the packaging acquired is compliant, and must keep related records for a minimum of five years. Claims of trade secret or confidentiality are handled under the Code of Regulations provisions cited in that section.
Read together with section 42370.6, which puts the Department of General Services in charge of making sure new, modified or renewed agreements and procurement comply and of mirroring the approved list within 90 days of publication, the conclusion for a supplier is blunt: your documentation is part of your customer’s defence file. Two operational consequences follow.
First, item identity has to be traceable across three documents: the List entry, the invoice, and the carton label. If the List says one name and your paperwork says another, the buyer cannot demonstrate compliance even when the goods are correct. Second, five-year record retention should be agreed in the supply relationship, not improvised. Ask us to put the item code, the production base, the material and coating declaration and the applicable documents on the same page as the packing specification, which is what our specification-sheet and pre-shipment inspection guides are written to support.
One final legal point worth stating plainly: SB 1335 does not preempt a city, county or city and county from adopting and enforcing more restrictive takeout packaging rules. A compliant statewide item is not automatically compliant with a local ordinance, and a California bid should be checked against both.
Send us the facility type, the item categories on the bid, and the item names you intend to invoice. Then ask these seven questions, because they are the questions the statute and the criteria actually turn on.
What we can put in writing today: our published formats carry item codes and specifications on the product page, with size, weight per piece, carton dimensions and carton quantity, and free samples are available with postage at the buyer’s own expense. Minimum order quantities are confirmed by SKU and order range rather than a single site-wide figure, and our certifications are scoped by production base, SKU, formula, colour and destination market, so we will tell you which certificate covers the specific item you are bidding and which does not. What we will not do is present a certificate as an SB 1335 List entry.
There is one gap we are stating openly rather than papering over. We were not able to reach CalRecycle’s public List while writing this guide, so this article does not assert whether any specific Zhongxin item currently appears on it. Treat the List as the only source of truth for that question, search it item by item before you bid, and if an item you want is not on it, come to us with the specification, the material route and the destination facility type. Applying through the reporting system is a manufacturer action, and the data it requires, dimensions, weight, barrier construction, test results and disclosure, is exactly what a molded fiber factory holds.
No. A BPI certificate shows compostability performance against a recognized standard. SB 1335 compliance for a covered facility depends on whether the specific item is identified on CalRecycle’s List of Approved Food Service Packaging, or whether an exclusion or inventory relief applies. The certificate is useful supporting evidence in an application; it is not entry.
Yes. The covered categories of food service packaging are plates, cups, bowls, trays, and hinged or lidded containers, which is most of a molded fiber range. Straws, cup lids, plastic bags and utensils are expressly excluded from the definition, as are beverage containers, single-use packaging for unprepared food, and ceramic, porcelain, glass or nonfoil metal ware that the facility washes and reuses.
Not automatically. CalRecycle’s materials list already recognizes molded fiber derived from sugarcane bagasse as a material type meeting the compostable criteria on the condition that it contains no plastic. An item with a plastic dispersion coating, lamination or liner is a different construction, and California’s criteria are stricter than the laboratory standards in that respect, with a 90 percent within 60 days figure for plastic items against the 180 days in ASTM D6400 and D6868.
Items must not contain more than 100 parts per million total fluorine, which CalRecycle uses as a proxy for intentionally added PFAS, based on the threshold established through its external scientific review. The tests for the recyclable and compostable criteria apply to items made from plastic or fiber. Ask for the report tied to the exact item, base, formula and colour, and check whether the result is reported as total fluorine or total organic fluorine.
Only within the relief in Public Resources Code section 42370.4: inventory possessed before the list was published, inventory possessed before an item was removed where the item was on the list at the time of possession, and the equivalent tests for stock acquired under contracts entered into before those dates. For contracts entered into, renewed or updated after publication, the facility is responsible for compliance.
Yes. The department must evaluate the list no less than once every five years and may add or remove types of packaging after evaluation. Before removing an item it makes a preliminary determination, notifies the manufacturer with the reasons and allows at least 30 days for comments and additional information. In October 2025 CalRecycle completed its first re-evaluation, and in spring 2026 removed items no longer manufactured or no longer available in California.
Yes, unless an exclusion applies. Recognizing sugarcane bagasse fiber on the materials list is a material-level determination that supports qualification; the operating rule for a covered facility is still whether the packaging type is identified on the List when food is dispensed. The main documented exclusions are for single-use disposables such as straws, cup lids, plastic bags and utensils, unprepared and prepackaged food, beverage containers, reusable hard goods, and health-related products including specific use at health facilities, residential care facilities for the elderly and community care facilities where the facility makes and can show the required determination.
No. The facilities covered are food service operations located in a state-owned facility, operating on or acting as a concessionaire on state property, or under contract to provide food service to a state agency. A private venue or ordinary restaurant is outside this program, though it remains subject to other California rules on compostable labeling, PFAS and packaging. Separately, SB 1335 does not stop a city, county or city and county enforcing stricter takeout packaging rules, so a local ordinance still has to be checked.
SB 1335 is a purchasing gate; it is not the same rule as California’s compostable labeling law. If your question is what may be printed on a bag, a lid or a carton, read California AB 1201 compostable labeling requirements next, and for the broader U.S. claims picture see recyclable claims and chasing arrows on bagasse tableware.
For the specification work behind the material route, use how to read bagasse and molded fiber specification sheets and what bagasse packaging is made of. For the evidence files, use the PFAS-free procurement checklist and how to verify a BPI certificate, product listings and SKU matching. For performance qualification before a bulk order, see how to test bagasse food containers for leaks, oil resistance and soak-through, and bagasse tableware in hospital and senior-living foodservice for the health-facility context.
Product pages with published specifications: PCT096 9 inch by 6 inch clamshell, PCT091 9 inch clamshell, 24 oz round bowl, CP012 12 oz cup, five-compartment tray and TR104 fiber tray, inside our compostable clamshell container range, bagasse tableware and food packaging sections. Official references: CalRecycle’s Sustainable Packaging for the State of California Act of 2018 program page, the List of Approved Food Service Packaging, the SB 1335 rulemaking archive, Public Resources Code sections 42370 to 42370.7 and the FTC Green Guides at 16 CFR Part 260.
If you are preparing a bid for a covered California facility, send us the facility type, the item categories and the item names you plan to invoice through our contact page. We will reply with the material route for each format, the total fluorine and regulated-metals evidence we hold for that SKU and base, the Proposition 65 disclosure position, and a clear statement of what our certifications do and do not cover.