Zhongxin supplies international packaging groups and serves end-use applications for leading foodservice, retail, and supermarket brands.
When a US buyer imports moulded fibre tableware made from sugarcane bagasse, the responsibility question is usually answered with one sentence: the factory must be FDA compliant. That sentence is wrong in two places. This guide separates the obligations that bind the Chinese manufacturer from the obligations that bind the US importer, and names the legal basis for each one, so a procurement team can assign the work to a person instead of to a phrase.

Sealed export cartons and stacked bagasse clamshells, plates and bowls in a moulded fibre tableware plant: the shipment side of the document pack.
Three points decide almost every conversation about responsibility.
The practical consequence is a division of labour rather than a dispute: the factory owns the making, the importer owns the proof, and both are protected by the same document trail.
The confusion starts with the word food. Section 201(f) of the act defines food broadly, and moulded fibre plates look like a food-contact product that FDA must regulate the same way it regulates the meals served on them. The Code of Federal Regulations splits the two on purpose.
In the facility registration subpart, 21 CFR 1.227 states that food, as used in that subpart, does not include food contact substances as defined in section 409(h)(6) of the act, and does not include pesticides. FDA restates the same rule in plain language in its FSMA FAQ: for purposes of registration, food-contact substances are not considered food, and therefore do not trigger the requirement to register. The same exclusion logic runs through the prior notice rule. Under 21 CFR 1.276(b), the prior notice requirement for imported food does not apply to food contact substances as defined in section 409(h)(6). So an importer of bagasse clamshells is not filing prior notice for them, and is not looking for a factory registration number as an entry condition.
The Foreign Supplier Verification Program is where the story gets genuinely subtle, and where most online answers go wrong in the other direction. The FSVP definition of food in 21 CFR 1.500 cross-references section 201(f) with only one exclusion: pesticides. Unlike 1.227, the FSVP subpart contains no carve out for food contact substances. Read from the rule text alone, an importer of moulded fibre tableware would appear to owe a full foreign supplier verification programme. FDA does not enforce it that way. In the FSMA FAQ answer labelled FSVP.8, FDA states that it intends to exercise enforcement discretion for food contact substances with regard to the FSVP requirements, while reminding readers that importers of food contact substances remain subject to the statutory prohibition in section 301(a).
That distinction matters commercially. Enforcement discretion is a policy about how FDA uses its resources; it is not a legal finding that the product falls outside the statute, and it can change. A buyer who reads a summary article saying FSVP does not apply to packaging and then drops all supplier verification has removed the only mechanism that produces the records needed when a shipment is questioned. Section 301(a) exposure did not go away, and neither did the private requirements from retailers, food service chains and state regulators that mirror the same documentation. FDA’s own starting point for the importer side is its Importing Food Products into the United States page, and the two agency explainers behind the material layer are the consumer-facing Understanding How the FDA Regulates Substances that Come into Contact with Food and the industry-facing Determining the Regulatory Status of Components of a Food Contact Material. A buyer can use either page to test whether a supplier statement names a real basis.
Move past registration and the manufacturing obligations become more concrete. FDA applies the CGMP regulations in 21 CFR part 117, subpart B to the manufacture of food packaging. Those rules cover sanitary design and operation, controls against microbiological, chemical, filth and foreign material contamination, and controls against allergen cross contact. This is the layer a buyer can audit: production records, cleaning and sanitation records, foreign material control, and lot traceability.
The second factory-side layer is the legal permission to use the materials themselves. 21 CFR 174.5(a) attaches good manufacturing practice conditions to every indirect food additive regulation: where no limit is specified, the amount of a substance that ends up in food must not exceed what results from using no more than reasonably required to accomplish the intended physical or technical effect in the article, the substance must not be intended to have a technical effect in the food itself, and any substance used as a component of a food-contact article must be of a purity suitable for its intended use. Paragraph (b) adds that a regulation permitting a use does not relieve it from other provisions of the act, and paragraph (c) adds that permission as an indirect component is not permission to add the substance directly to food.
Then 21 CFR 174.5(d) lists, exhaustively, the categories of substances that may lawfully be used as components of articles that contact food, subject to any prescribed limitations:
Every bagasse tableware component should be traceable to one of those five lines. Where a substance is not covered by one of them, and it migrates or may be expected to migrate into food, the remaining route is the threshold of regulation provision, codified at 21 CFR 174.6 and 170.39 rather than existing only as informal policy. Under 170.39 a use may be exempted from food additive regulation where the substance has not been shown to be a carcinogen and there is no structural reason to suspect one, where the dietary concentration is at or below 0.5 parts per billion, corresponding to no more than 1.5 micrograms per person per day based on a daily diet of 1,500 grams of solid food and 1,500 grams of liquid food, where the substance has no technical effect in or on the food it migrates into, and where the use has no significant adverse environmental impact. That exemption is obtained through a request to FDA, and the resulting list of exempted uses is maintained publicly on display at the agency, listing the requesting company, the chemical, the specific use and any limitations, without trade names.
Moulded fibre tableware is rarely one material. Below are the four routes a buyer of bagasse tableware actually encounters, the permission path each one most likely relies on, and the question that turns a vague answer into a document. Nothing in this table is a legal conclusion about any specific product; it is the request list a buyer uses to get the supplier to state its own basis in writing.
| Material route | Where it is used | Most likely 174.5(d) path | What the importer should request |
|---|---|---|---|
| Bleached fibre, uncoated | White plates, bowls, clamshells, cups, cutlery | (d)(4), through the paper and paperboard rules. 21 CFR 176.170 allows substances it lists to be used as components of the uncoated or coated food-contact surface of paper and paperboard intended for contact with aqueous and fatty foods; where the food is a dry solid with no free fat or oil on the surface, identified as Type VIII in the table in 176.170(c), the applicable rule is 21 CFR 176.180 instead | A statement of which category in 176.170(a) the food-contact surface components fall under, or the extractives result showing the finished article stays within the limit in 176.170(c), which is 0.5 milligram of net chloroform-soluble extractives per square inch of food-contact surface, corrected for wax, petrolatum, mineral oil and zinc, tested under the food type and time and temperature conditions that match the intended use |
| Natural, unbleached fibre, including bagasse and bamboo blends | Natural-colour trays, burger boxes, meal trays, lids | (d)(4), same paper and paperboard route, with virgin bagasse fibre, bamboo fibre or wood pulp as the substrate | The fibre composition stated per SKU, and confirmation of whether the sheet is uncoated or carries a barrier treatment. Recycled fibre needs a separate conversation: part 176 contains no clause that qualifies recovered paper for food contact, so a recycled content article is not automatically covered by the paper and paperboard permissions that apply to virgin fibre |
| PLA or PBAT lamination or coating | Barrier board laminated paper boxes, film-lidded trays, coated pulp bowls for wet food | Cannot be assumed to be (d)(4). It is normally (d)(5), an effective FCN, sometimes (d)(3) prior sanction, or (d)(1) and (d)(2) where a GRAS determination covers the use | The type of clearance the film or resin relies on, its number, and its stated conditions of use, including temperature, food type and contact time. The clearance belongs to the film or resin supplier and travels with those conditions, so a converter inherits them rather than earning its own. If a supplier cannot name the clearance type, the laminate is undocumented |
| Polypropylene window, lid or thin-wall component | Clear windows on pulp trays, PP lids, insert cups | (d)(4), through 21 CFR 177.1520, which states that the olefin polymers listed in that section may be safely used as articles or components of articles intended for use in contact with food, with polypropylene defined there as a basic polymer manufactured by the catalytic polymerization of propylene | A supplier statement that the resin is used under 177.1520 with the food types and conditions of use cross-referenced from the tables in 176.170(c), plus the moulding compound data sheet. Heat and fat are where an olefin component fails to match its stated use, so hot-oil and microwave conditions belong in the question |
This is the table to paste into an internal email when a team needs to know who does what. It replaces the sentence that everybody must comply.
| Obligation | Factory | US importer | Legal basis |
|---|---|---|---|
| FDA food facility registration | Not triggered by making food contact substances | Not triggered by importing them | 21 CFR 1.227; FSMA FAQ FPM.1; some buyers still request it, and a voluntary registration can be supplied with the document pack |
| Prior notice at entry | Not applicable | Not applicable to food contact substances | 21 CFR 1.276(b) |
| CGMP for manufacturing | Applies | Relies on it, and can request audit evidence | 21 CFR part 117 subpart B; FSMA FAQ FPM.3 |
| Hazard analysis and preventive controls, supply chain program | Not applicable to manufacturing food packaging | Not applicable as a rule requirement | FSMA FAQ FPM.2, covering subparts C and G |
| Lawful use of the substances in the article | Primary: chooses fibre, coatings, laminates, inks, adhesives and resins | Secondary: verifies and keeps the record | 21 CFR 174.5(a) and 174.5(d) items 1 to 5; 176.170, 176.180, 177.1520; effective FCN under section 409(h) |
| Threshold of regulation position for any uncovered migrating substance | Must be able to explain the technical basis | Should not accept silence as an answer | 21 CFR 174.6 and 170.39 |
| Foreign Supplier Verification Program | Supplies the data the programme would use | Statutorily the importer, with FDA enforcement discretion for food contact substances | 21 CFR 1.500 definition covers food contact substances textually; FSVP.8 records the enforcement discretion |
| No adulterated food entering US commerce | Exposure through the chain | Full exposure, no enforcement discretion relief | Section 301(a) of the act, 21 USC 331(a), cited in FSVP.8 |
| Written guarantee supporting a defence | Issues it | Relies on it | Section 303(g)(1), 21 USC 333(g)(1) |
| Label and state-level claims | Produces artwork to specification | Owns the claim made in the market | State compostable labelling and plastics rules; see the California labelling guide linked below |
Responsibility only becomes operational when it is expressed as documents with named issuers, scoped coverage and dates. The following is the pack a buyer should expect to receive per SKU family, with the honest limits of each item.
| Document | Typical issuer | What it proves | What it does not prove |
|---|---|---|---|
| Declaration of compliance, or compliance letter | The manufacturer | The supplier states the article, the food types and conditions of use, and the legal basis it relies on, signed and dated | Independent verification. A declaration is a promise with structure, and its value depends on whether the fields name a legal basis and the correct test conditions |
| Migration and extractives test reports | Commercial laboratories such as SGS and TUV | Measured results for a named sample under stated time, temperature and food simulant conditions | Coverage of every SKU, every colour, every coating formula or every heating scenario. A report is one sample under stated conditions |
| Total fluorine or targeted PFAS report | Commercial laboratories such as SGS and TUV | Whether fluorine-based water and oil repellents were used at the tested level in the tested article | That the formula is permanent. Barrier formulas change, so the report date and the formula it names matter more than the word PFAS-free in a specification sheet |
| Third-party management system certificates | Certification bodies | Site level control frameworks. Our tableware production entities each hold ISO 22000 and BRCGS Packaging Materials certification as of October 2026, with scope and validity per site | That a specific SKU is FDA compliant. Food safety and packaging safety schemes are not food contact substance clearances |
| Compostability certificates | BPI, TUV Austria OK compost, Australian Bioplastics Association | That a named product scope meets a compostability standard, within certificate limits on formula, colour, category and grammage | Food contact compliance. BPI and OK compost do not address 21 CFR 174.5 or 176.170, and the two systems answer different questions |
| Guarantee of compliance in the purchase contract | The supplier, to the buyer | The written assurance that supports the statutory guaranty position | Nothing about testing. It is a contract remedy, and it is the document US counsel asks for first |
Two of these are commonly confused and cost buyers real money. A compostability certificate is not a food contact clearance, and a management system certificate is not a product clearance. The distinction, and what each certificate in a supplier portfolio actually proves, is worked through in our guide to what each document actually proves, and the wider question of which certifications a US or EU buyer needs is covered in BPI versus FDA versus EN 13432.
Regulation allocates exposure to the importer at the border. Contract allocates cost between the parties. A supply agreement that is silent on the five clauses below leaves the importer carrying both. We publish clause names, not clause text.
| Clause | What it decides | Why it matters for FDA-level compliance |
|---|---|---|
| Guarantee of compliance | What the supplier warrants about the material, the process and the legal basis for each component | Supports the written guaranty position under section 303(g)(1) of the act and defines the standard the goods must meet |
| Indemnification | Who pays when a claim, detention or market action follows from a compliance failure | Sets the economic consequence of a material substitution made without notice |
| Recall cost sharing | How retrieval, destruction, freight, testing and notification costs are split | A recall decision is made in hours, and it should not be made while the contract is read for the first time |
| Batch record retention period | How long the supplier keeps production, sanitation and raw material records per lot | The importer can only verify what still exists. Retention shorter than the product life makes verification theoretical |
| Notice of reformulation or material change | Advance written notice before a fibre blend, barrier formula, coating, ink or resin changes | A formula change invalidates the mapping between the SKU and its test reports and clearances |
| Document pack deliverables | Which documents ship with which lots, and in what form | Fixes the per shipment evidence flow instead of leaving it to a request at customs |
| Audit right | Who may audit the site, at what notice, with what scope | Turns the CGMP obligation from an assertion into something a buyer can inspect |
| Certificate maintenance and expiry notice | Who tracks certificate and report validity windows and notifies before lapse | Most compliance gaps found in a re-audit are expired documents, not failed tests |
Our standard agreements cover guarantee of compliance, indemnification, recall cost sharing, batch record retention, notice of material change and document pack deliverables as named clauses. The drafting detail stays between the two commercial parties; what a buyer can request in advance is the clause list and the document list attached to the order.
Three questions come up in almost every negotiation, and the honest answers are conventional rather than clever.
Testing cost. Product-specific migration, extractives and total fluorine testing is normally commissioned by the party that needs the claim, which in practice means the buyer pays for a new test when the buyer asks for a scope the supplier does not already hold, and the supplier pays for tests that support its own existing specification. What matters commercially is that the test is scoped before the order, not after a question at the port, because a report generated to answer an accusation costs more and arrives later.
Record keeping. The factory holds production, sanitation and raw material records because it is the only party that generates them. The importer holds the received document pack, because the importer is the party that must produce records to FDA, to a retailer audit or to a state regulator. A retention clause in the agreement makes those two sets of records usable together; without it, the importer holds a certificate and the factory holds the data that nobody can retrieve.
Detection of a non-conformance. When a test result fails, the shipment is the importer problem and the cause is the factory problem. The clause that decides the outcome is notice of material change plus the recall and indemnity allocation, which is why those names belong in the agreement before the first order rather than during the first incident.
Written plainly, so a buyer knows which line in the tables above is answerable today.
For the wider order-to-shipment view, the same obligations appear as steps in our guide to importing bagasse tableware to the USA, and the pre-order document list is in our FDA food contact packaging checklist. Whether a factory needs FDA approval at all is a separate misunderstanding, answered in what FDA approval actually means for compostable plates. Buyers who are also weighing whether a supplier can hold its position for a multi year contract will find the verification method in how to verify the financial stability of a Chinese tableware supplier, and the full certificate list per production base on our certifications page and in the certification portfolio overview.
Federal food contact rules are the floor, not the ceiling. A bagasse plate that is properly documented under 21 CFR 176.170 can still be unlawful to sell with a compostable claim in California, and can still fail a state plastics or labelling rule that has nothing to do with FDA. State compostable labelling requirements are worked through in California AB 1201 and what importers must clear before selling, fluorine-free verification in the PFAS-free verification document guide, and the material family itself on our bagasse tableware hub, moulded fibre packaging hub and food packaging hub. Clamshell buyers should read the scope limits on compostable clamshell containers alongside the FDA layer, because the compostability certificate scope and the food contact route are set by different bodies of rules.
No, not as a matter of law. For FDA facility registration purposes, food contact substances are not treated as food, so manufacturing bagasse tableware does not trigger the registration requirement, as stated in 21 CFR 1.227 and in FDA FSMA FAQ answer FPM.1. Some buyers, brokers and retailers still ask for a registration number, which is why some manufacturers hold a voluntary registration. A voluntary registration is not evidence of product level food contact clearance, so it should not replace the declaration, the test reports and the material route answers.
The rule text and the enforcement position differ, and both matter. The FSVP definition of food in 21 CFR 1.500 excludes only pesticides, so on the text of the regulation the importer of a food contact substance is inside the programme. FDA states in FSMA FAQ answer FSVP.8 that it intends to exercise enforcement discretion for food contact substances with respect to FSVP requirements, while confirming that importers of food contact substances remain subject to the adulteration prohibition in section 301(a). The practical answer is to keep a proportionate supplier verification file: a signed declaration naming the legal basis, current test reports scoped to the SKU, the third party audit or certificate for the site, and written notice of material change. Enforcement discretion is not a reason to stop keeping records.
No. 21 CFR 1.276(b) excludes food contact substances, as defined in section 409(h)(6) of the act, from the prior notice requirement. Buyers often confuse prior notice with entry filing for customs, which is a separate process handled by the importer of record and the broker with a different set of data elements.
Collect six items, all scoped to the actual SKUs rather than the factory. First, a declaration of compliance that names the article, the food types and conditions of use, and the specific legal basis relied on. Second, migration or extractives test reports from a named third party laboratory, with the tested sample described as the SKU. Third, a total fluorine or targeted PFAS report where the buyer needs fluorine-free assurance. Fourth, the current third party site certificate with its scope and validity window. Fifth, the clearance statement for any laminate, coating, ink or resin, including the number and the conditions of use. Sixth, the contractual guarantee of compliance. Items 2 to 5 should be dated, because an expired report is the most common finding in a re-audit.
At the border the exposure sits with the US importer, because the importer is the party introducing the article into US commerce and section 301(a) of the act, 21 USC 331(a), applies to adulterated food with no enforcement discretion relief for food contact substances. Between the two parties, the economic result is decided by the contract: the guarantee of compliance, the indemnity, the recall cost sharing clause, the batch record retention period and the notice of material change clause. A buyer who has those five clauses and a dated document pack can move a detention from a business crisis to a supplier quality case.
No. Compostability certifications such as BPI, OK compost and AS 4736 or AS 5810 addresses show that a product breaks down under stated conditions within a certified scope of formulas, colours, product categories and grammage limits. They do not evaluate whether the components of the article are lawfully permitted for food contact under 21 CFR 174.5(d), and they do not address extractives or migration limits. Conversely, food contact clearance says nothing about whether a product may be sold with a compostable claim. The two layers need to be true at the same time, and they come from different documents.
Usually not, and this is where the two regulatory layers produce opposite answers. A laminated article can hold a compostability certificate while its barrier layer is a polymer, because certification schemes and food contact rules ask different questions. If a buyer needs a plastic free definition for a state single use plastics rule or a corporate specification, the article should be qualified against that definition and against the uncoated fibre route in 21 CFR 176.170 or the coating clearance separately, not against the certificate alone.
Conventionally, the supplier pays for testing that supports a specification it already claims, and the buyer pays for additional scope it requests, such as a different food simulant, a higher temperature, or a targeted rather than screening method. What is expensive is commissioning a test after a question arises, so the scope should be agreed and written into the order before the first production run, together with who owns the report and whether the report may be shared with the buyer customers.
If you are sourcing moulded fibre tableware for the US market, send us your SKU list and the food types you intend to serve. We will tell you, line by line, which obligations we can document today, which ones need a test scoped to your use conditions, and which ones need a statement from a film, ink or resin supplier. You can start a specification and document review at our contact page.
This page is written for procurement and supplier communication. It summarises published US federal provisions and FDA guidance as of October 2026 and is not legal advice. Importers should confirm the FSVP, customs and state law position for their own products with a qualified US regulatory advisor.